Poppy Humanoid
Educational humanoid — research and learning platform for bipedal locomotion study
AI-assisted rating · No verified user reviews yet · Be the first to rate
Opens Poppy Project's own product page in a new tab. Robofy is independent — we research and compare, but pricing and orders happen on the manufacturer's site.
- University robotics labs studying bipedal walking, spring-based joint mechanics, and design variations through 3D-printed body swaps
- Middle and high school STEM curricula teaching robot kinematics, Python programming, and hands-on assembly over 7 hours
- Artistic performances and installations pairing human dancers with Poppy for choreographed human-robot interaction pieces
Open Research Platform
Fully open-source hardware and software enable deep customization for gait research, spring-joint mechanics, and 3D-printed morphology experiments in academic settings.
- Obstacle avoidance
- Multi-floor
- Elevator support
- Voice interaction
- Screen interaction
- Autonomous charging
- Fleet management
- Indoor
- Outdoor
When to deploy this.
- University robotics labs studying bipedal walking, spring-based joint mechanics, and design variations through 3D-printed body swaps
- Middle and high school STEM curricula teaching robot kinematics, Python programming, and hands-on assembly over 7 hours
- Artistic performances and installations pairing human dancers with Poppy for choreographed human-robot interaction pieces
When to skip it.
- Cannot walk autonomously—requires manual guidance by the hands, making independent locomotion impossible
- High motor cost ($7,600+ out of $8,000–9,000 total) makes the robot fragile to damage and economically inefficient for schools operating on tight budgets
- No obstacle detection or navigation; strictly confined to controlled lab or classroom environments with flat, uncluttered floors
Use this moment to capture buying intent before the user drifts back into research mode.
Directional estimate based on price, labor offset, and readiness scores.
$8K - $9K
Available
How operationally ready this robot is for production deployment today.
Confidence in the published ROI numbers — how likely the savings actually materialize.
Share of the human task this category can credibly offload.
Fit with your target environment — lighting, floor type, congestion.
Expected maintenance load and downtime risk. Lower is better.
Long-horizon strategic upside — where the platform points 3+ years out.
Be the first to rate this robot — your rating helps calibrate the AI score.
Robofy separates manufacturer-confirmed facts from operator estimates. Anything not yet press-sourced or supplier-confirmed is tagged so you can decide how much weight to give it.
Price and cost breakdown (motors 60% of total) from GitHub official repository. Specifications (85 cm height, 3.5 kg weight, 25 DOF) confirmed across official Poppy Project site, Generation Robots distributor, and academic papers. Development history and current deployment context (education, science, art domains) from Inria Flowers Lab research documentation. Walking mechanism and spine design details from New Atlas press coverage. Assembly time (7 hours) and Raspberry Pi 3/4 electronics stack from GitHub and Robohub sources. No battery life, payload weight limits, or autonomous charging available in public sources.
- MaturityInferred
- Deployment readinessInferred
- ROI clarityInferred
- Labor replacement potentialInferred
- Environment fitInferred
- Maintenance riskInferred
- Future potentialInferred
- Lease rangeEstimated
- Battery lifeEstimated
- SpeedEstimated
- Dimensions (mm)Estimated
- CapabilitiesEstimated
- Price rangeSourcePress
- AvailabilitySourcePress
- PayloadSourcePress
- DimensionsSourcePress
- WeightSourcePress
- NavigationSourcePress
- ConnectivitySourcePress
Track prices, compare robots, and get quotes on the go.
Other paths worth comparing.
- Match61Pilot Ready
Booster RoboticsT1RoboCup champion bipedal humanoid for embodied AI research and robotics competition
- Match52Pilot Ready
MagicLabMagicBot Z1Compact research humanoid with spring-loaded acrobatics, tight indoor access, 2-hour tether.
- Match48Pilot Ready
UnitreeH2Full-size 182 cm humanoid with 31 DOF at $29,900 — research platform, not production-ready labor.
- Match54Pilot Ready
PAL RoboticsTIAGo ProMobile manipulator — research-grade dual-arm for factory and healthcare collaboration
Frequently asked questions
How much does Poppy Project Poppy Humanoid cost?
Poppy Project Poppy Humanoid is priced at $8,000–$9,000 (manufacturer list pricing; final quotes vary by configuration and region).
What is Poppy Project Poppy Humanoid best used for?
Poppy Project Poppy Humanoid is best suited for: University robotics labs studying bipedal walking, spring-based joint mechanics, and design variations through 3D-printed body swaps · Middle and high school STEM curricula teaching robot kinematics, Python programming, and hands-on assembly over 7 hours · Artistic performances and installations pairing human dancers with Poppy for choreographed human-robot interaction pieces.
Can I buy Poppy Project Poppy Humanoid today?
Yes — Poppy Project Poppy Humanoid is commercially available and shipping today.
What are the best alternatives to Poppy Project Poppy Humanoid?
Buyers most often weigh Poppy Project Poppy Humanoid against Booster Robotics T1, MagicLab MagicBot Z1, Unitree H2. Use Robofy's head-to-head compare pages for a spec-by-spec breakdown.
Poppy Humanoid vs T1 →Poppy Humanoid vs MagicBot Z1 →Poppy Humanoid vs H2 →